Hr Fast Immersion Thermocouple for Foundry to Measure The Temperature of Molten Metal

• Installation Type: Wall-Mounted Type
• Sensing Type: Thermocouple
• Contact: Contact
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SIMIS-Thermocouple
• Output Signal Type: Digital Type
• Production Process: Injection
• Material: Dewpoint Lithium Chloride
• Measuring Medium: Temperature
• IP Rating: IP20
• Certification: ISO
• Customized: Customized
• Product Name: Fast Immersion Thermocouple
• Type: Ks604
• Range: 0 --- 1750 Degrees Celsius
• Character: Excellent Accuracy.
• Response Time: 4-6 S
• Measured Rate: 98%
• Graduation: S/R/B /W
• The Length of Thermocouple: 300mm
• Allowanble Tolerance: + -5
• Chrarcter: Rapid Response
• Transport Package: Carton and Pallet
• Specification: 1.1*1.1*1
• Trademark: SIMIS
• Origin: China
• HS Code: 9025191090
• Production Capacity: 1000000
• Package Size: 55.00cm * 37.00cm * 30.00cm
• Package Gross Weight: 1.500kg
• Lead Time: 7 days (1 - 2000 Pieces) ; To be negotiated ( > 2000 Pieces)

Product Description

Fast immersion thermocouples for measuring the molten metal
 

Product Description

  Immersion thermocouples are used to monitor and control the temperature of liquid metal during melt preparation, holding, degassing and casting operations. Rapid response type expendable thermocouple is mainly composed of temperature probe and large paper tube. The positive and negative wires of the temperature probe are welded to the compensation wires embedded in the bracket covered by the small paper tube. The hot wire is supported and protected by quartz. The temperature probe is covered with a lid to prevent scum. All components are placed at the end of the thermocouple and bonded together with refractory filler.

 

Product Features

1. The world standard thread is the "heart" of the thermocouple tip and even the entire thermometer.

2. Excellent accuracy. Tolerance within 3 degrees Celsius.
3. It can be handled safely.
4. Range: 0 --- 1750 degrees Celsius.
5. Rapid response, measuring time no more than 6 seconds,
6. low thermal inertia, easy operation and maintenance.

Product Parameters

Product Name	Graduation	Allowanble Tolerance	Max. Temperature	Response Time	Measured Rate	Remarks
Expendable thermocouple	S	±3	1650ºC	4-6S	≥98%	The length of thermocouples can be customized according to customers' requirement
	R	±3	1650ºC
	B	±3	1750ºC
	W	±5	1750ºC

 

Usage

1. According to the object and scope of measurement, select an appropriate protective paper tube length

 and a suitable temperature measuring gun.

       2. Install the fast thermocouple on the temperature measuring gun,

and return the pointer (or digital display) of the secondary instrument to zero. At this time,
 it means that the contact is good and the measurement can be carried out.

      3.It is advisable to insert the fast thermocouple into the molten steel at a depth of 300-400mm.

When measuring, do not measure the furnace wall or slag, so as to be fast, stable and accurate.
 Even the immersion time in molten steel shall not exceed 5 seconds, otherwise it is easy to burn the temperature measuring gun.

     4.After the temperature measuring gun is lifted out of the furnace, remove the used thermocouple and install a new one, 
 stop for a few minutes, and prepare for the next measurement. Continuous measurement and dismantling are not allowed,
otherwise the temperature difference will fluctuate.

Product Pictures